Get matched with top marble restoration pros in Fairview, MT

While quartz is highly stain-resistant, it is not completely stain-proof. Spills, including water, should be wiped up as soon as possible to prevent staining. Minor stains are usually not permanent and can be removed using a quartz-safe cleaner, a simple mixture of dish soap and water, or a baking soda paste applied with a soft microfiber cloth. For severe stains that persist, professional treatment may be necessary, and in rare cases, countertop repair or replacement might be required.

It is not recommended to put a hot pan directly on a marble countertop. While marble is heat-resistant, it is not completely heat-proof, and extreme or prolonged exposure to high heat can cause discoloration, cracking, or chipping. Pans may also scratch or nick the surface. To protect your countertop and maintain its integrity, always use trivets or hot pads. Note that faux marble finishes do not resist heat and require protection from hot items at all times.

You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions. 

Clorox wipes contain bleach, which is unsafe for use on quartz countertops. When used over time, the bleach will damage the countertop surface and cause it to become discolored or damaged. Instead of Clorox wipes, use a pH-neutral multipurpose solution and clean the surface gently using a soft microfiber cloth.