Get matched with top driveway gate pros in Emigrant, MT

Thieves can open almost anything with enough time and the right tools, but they also prefer easy targets that are unlikely to get them caught. Forcing open gates is loud and difficult, and to be able to open one electronically requires extensive knowledge of the system, which most thieves don't have. Electric and other security gates are great deterrents because the thief will move to an easier target. If the thief is determined to enter your property, they will most likely find a different entrance point.

While spring gates close gently but firmly, they’re not a foolproof solution for securing your yard to prevent pets or kids from escaping or unwanted guests from entering. Installing a gate latch that is sturdy and lockable with a self-closing mechanism is more effective, especially when used alongside other methods for keeping your home safe, such as cameras or motion detectors.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate.