Get matched with top stone and gravel pros in Deer Lodge, MT

No, you shouldn’t lay bricks directly on dirt. While it might seem like a shortcut, it leads to a patio that shifts, sinks, and becomes a maintenance headache. Dirt expands, contracts, and erodes—none of which mix well with long-term stability. To build something that lasts, excavate the topsoil, compact a layer of crushed gravel, and add a coarse sand-setting bed. This layered base gives your bricks proper support, allows drainage, and helps block weeds from creeping through. Cutting corners here just means you’ll spend more time—and money—repairing your brick patio later.

Removing paint from brick can have both aesthetic and practical value. Some people prefer the timeless look of bare brick, making it worthwhile to remove old paint layers. Brick also lasts longer when unpainted, as paint traps moisture, causing the brick to deteriorate more quickly. If your brick walls are already in bad shape, stripping the paint off might do more harm than good.

Unfortunately, there are many disadvantages to stone houses. They are slow to build and the materials are pricey, both of which balloon the total cost. Stone walls require a more robust foundation, which costs more to install. Running plumbing, electrical, and HVAC through a stone house is much more difficult too, so homeowners need to seriously consider if the aesthetic benefit is worth the cost of building with stone. One of the questions to ask a masonry contractor is if a similar aesthetic can be achieved with another material.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.