Get matched with top sink installation pros in Columbus, MT

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Wall-mounted faucets are installed 6 to 8 inches above the countertop. The height you choose is very significant because the wrong choice will lead to a faucet that splashes water everywhere. Your installer should have a good recommendation based on your sink type, size, and shape. A good installer will ensure the sink is comfortable and splash-free.

The time it takes to install a sink depends on whether you hire a professional or do it yourself, as well as the complexity of the job. A professional plumber can typically install a sink in 1 to 4 hours, with most routine jobs taking around 1 to 2 hours. However, more complicated installations will take longer. Projects that involve rerouting plumbing, installing an under-mount sink, or making countertop modifications can take a full day. Installing a sink with a prefab vanity could also stretch the project to 6 to 8 hours. If you plan to install the sink yourself, you should set aside 4 to 6 hours, though it could take longer. It's also recommended to have a friend help, especially if you are working with a heavy sink made of a material like porcelain.

Try to tighten the clevis crew and adjust the lift rod if your sink stopper won’t stay up. Sometimes your screws became too loose over time, and as a result, there wasn’t enough resistance to keep the sink stopper up. If a damaged lift rod is the cause of the problem, you will need to replace it with a new rod.