Get matched with top driveway sealcoating pros in Cat Creek, MT

No. You cannot use asphalt products on concrete driveways. To seal a concrete driveway, use acrylic, epoxy, polyurethane, silane, siloxane, and silicate sealers or deep penetration sealers made specifically for concrete. Meanwhile, asphalt sealers contain refined coal tar (asphalt emulsion), water, sand, clay, polymers, and additives and are incompatible with concrete’s surface texture and higher density.

The best ways to increase the lifespan of your driveway are to carry out proper maintenance and get repairs done quickly. First, reseal your driveway every one to three years to protect it from the elements. If you start to notice significant cracks, hire a professional to diagnose the problem before it gets more serious. You can also use sand instead of salt when de-icing your driveway (since salt is corrosive) and clean your driveway annually using a pressure washer to keep it in tip-top shape.

Maintaining a driveway depends on the material your driveway is made of. Concrete and asphalt should be sealed to protect against water and freeze-thaw cycles. Cracks and expansion joints should be filled with a flexible polyurethane caulk or asphalt sealer. Before you apply a sealant to your driveway, consider pressure washing the surface. It will take off any loose sealant and any grime that might have caused a stain. Sealing over dirt and stains will trap it under the sealer.

If you live in colder climates, consider using sand rather than salt to de-ice. Sand helps melt the snow and ice without speeding up the freezing and unthawing process of your driveway, which helps prevent cracks from forming from the constant fluctuation of temperatures.

If you notice minor cosmetic problems with your driveway, you should seal it. Look out for cracks and holes on the surface, faded asphalt or concrete, and stains from oil and other chemicals. Replacing your driveway may be necessary if you’re dealing with significant problems—¼-inch cracks, large potholes, and puddles from drainage issues. The cost to install an asphalt driveway typically ranges between $4,200 and $9,000, significantly more than resealing. Consider talking to a professional to discuss whether resurfacing your driveway—a midway project between resealing and replacing—is a better option for you.