Best granite restoration pros near Sledge, MS

Use pH-neutral cleaners specifically designed for stone surfaces to clean granite or marble. Avoid acidic or abrasive cleaners that can damage the sealant or the stone itself. Regular re-sealing helps protect the surface from stains and damage.

No, you cannot use vinegar to polish marble. It is too acidic for cleaning or polishing and can etch the surface. Instead, opt for non-acidic cleaners made specifically for marble. Follow the manufacturer’s directions to ensure proper application and to protect the marble. However, a damp mop can be an effective marble cleaner when used appropriately and as long as moisture is immediately soaked up.

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.