Get matched with top asphalt driveway pros in Noxapater, MS

Asphalt and tarmac are not the same thing. Traditional tarmac, short for tarmacadam, uses tar as a binder to hold crushed stone together. Asphalt uses bitumen—a byproduct of crude oil—to bind aggregate. Though tarmac was once a go-to for roads, asphalt has become the modern standard. And these days, most surfaces referred to as “tarmac” are actually asphalt. So, while the names may overlap, the key distinction lies in the binder—tar for tarmac and bitumen for asphalt.

Give your driveway at least 24 to 48 hours to dry. After 72 hours, you can walk or park on it, but tread lightly. It might look solid, but it’s still soft and can be easily damaged. It can take 30 days to a year for an asphalt driveway to fully cure, so avoid parking extremely heavy vehicles on it. For the best results, always check with your contractor for their advice. Different mixes and weather conditions can affect curing times, so it’s worth waiting longer if it means a driveway that lasts.

Unlike drying, which takes between 48 and 72 hours on average, asphalt driveway cure times are different and take much longer. Your asphalt driveway won’t actually cure for around six months to one year. During this time, it’s more likely to get damaged or weakened by heavy machinery, vehicles, and high temperatures. 

The cost to pour a driveway apron depends on the material and size. Concrete costs $3 to $10 per square foot, asphalt ranges from $2 to $5, and pavers are $5 to $15 per square foot. Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between $540 and $1,800, depending on local rates and additional work required. Always consult a local driveway paving contractor to get an accurate estimate tailored to your project.