Get matched with top waste removal pros in Nettleton, MS

Depending on where you live and how much furniture you’re disposing of, you could schedule a large item collection with your municipal trash pick-up services, hire a junk removal company, or rent a dumpster.

The fastest way to remove carpet is to remove carpet in strips instead of trying to remove it in one large piece. Wear protective equipment such as gloves and goggles, use a utility knife to cut the carpet in long strips, and then pull at the edge of the strip to loosen the staples or glue. Carpet-cutting razor blades are best on your utility knife for the quickest removal.

While a rented dumpster can handle a wide variety of materials, there are significant restrictions on what is allowed. Generally, you can dispose of most non-hazardous household junk, yard waste, and construction debris.

Accepted items typically include:

• Furniture, carpets, old linens, and toys

• Wood and yard debris

• Small appliances and excess trash

• Renovation waste like old finishes, building debris, and roofing materials (unless they contain lead paint or asbestos)

However, you cannot put toxic, flammable, or hazardous materials in a dumpster. Prohibited items almost always include:

• Paint, gasoline, oil, and other fuels

• Household cleaners and other chemicals

• Electronics, batteries, and tires

• Refrigerators, hot water tanks, and medical waste

Since regulations can vary by location and company, it is essential to check with your dumpster rental provider for their specific list of accepted and prohibited items before you begin.

To remove carpet padding glue from concrete, scrape away as much of the top layers as possible with a sharp-edged scraper or putty knife. You can be more aggressive on a concrete floor than on hardwood, so scrape off as much as possible. Then you can soak the area with hot water for a few minutes before continuing to scrape. If there is still glue left behind, use a solvent that is made to remove adhesives and apply it to the area. Then scrape the rest of the glue off.