Get matched with top sand and rock delivery pros in Lambert, MS

It depends on the model of your pool. You’ll always have to level the topsoil, but most vinyl-lined pools require an additional 1- to 2-inch layer of sand to protect the liner. This way, when a foot kicks down to the bottom of your pool, it’s not scraping the liner against the hard ground. If your pool isn’t vinyl-lined, you can skip this step or add a layer of another base material, like decomposed granite. Always check your manufacturer’s instructions before you begin.

It depends. High-end colored mulch can be fairly costly. However, you'll have to replace less-expensive natural mulches, like pine needles and cedar mulch, more frequently. 

The cost is balanced out somewhat, though, as although you'll have to replace colored mulch less often, you'll have to replenish nutrients in your soil more frequently to make up for the decrease in organic matter and nitrogen from the mulch.

A base layer is typically required when installing artificial grass, and the specific materials depend on the surface where the turf is being placed.

If you are installing artificial grass over soil, you should lay down a sub-base and a weed barrier.

• Weed Barrier: A fabric weed barrier, weed membrane, or geo-textile paper is essential to prevent weeds from growing through and damaging the turf.

• Sub-base: This layer provides drainage, support, and prevents the turf from sinking. Common materials include a mixture of gravel and sand, such as crushed miscellaneous base (CMB), decomposed granite, decomposed limestone, or a specifically mixed road base. Other options include silica sand and granite sand.

If you are placing turf over a hard surface like concrete, you can often skip the sub-base and use a padded underlayment or shock-absorbent material like astro-cushion for comfort and safety.

If you are unsure which materials are best for your specific project, it's a good idea to consult with an artificial turf installer.

Most experts recommend a quarter-inch layer of compost for best results, and you will need about .77 cubic yards of material per 1,000 square feet. To measure how much compost to use, take the square footage of your yard and multiply it by .77, then divide that number by 1,000.