Get matched with top sandblasting pros in Jayess, MS

Q: How much does sandblasting cost?

• <div><p>The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.</p></div>

Q: Is sandblasting dangerous?

• <div><p>There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous. </p></div>

Q: How do I maintain flatwork surfaces?

• <div><p>Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.</p></div>

Q: Is it better to sand or pressure wash a deck?

• <div><p>Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.</p></div>

Q: What is the best way to sand a deck?

• <div><p>The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Jayess, MS?

Select your specific project to find the pro for you.

Verified Reviews for Sandblasting Service pros in Jayess, MS

*The Angi rating for Sandblasting Service companies in Jayess, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

*The HomeAdvisor rating for Sandblasting Service companies in Jayess, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Sandblasting Service needs.

Last update on August 23, 2025

Reviewed in August 2025
Apex Plumbing and Gas LLC did an outstanding from initial estimate to the end of the completed project. I definitely would without a doubt hire this company as well as refer to family and friends who may be in the need of their services.
Apex Plumbing and Gas LLC
Request a quote
Reviewed in February 2025
Caleb did a great job on my ceiling project. The old previously repaired water stain was completely covered and the retexture he applied blended well with the rest of the room. I recommend Caleb for painting services.
Caleb Carroll Painting & Sheetrock Finishing
Request a quote
Reviewed in November 2021
Great work. Highly qualified. Neat work. I couldn't be more pleased. I would recommend this service to anyone. Pleases customer, to say the least..
Bobby's Home Repair & Electrical
Request a quote
Reviewed in February 2020
Would definitely recommend their services.
Magnolia Professional Construction Services, LLC
Request a quote
Reviewed in August 2018
Service was great; he did a phenomenal, outstanding job. The quality of work for the price is unbeatable
Petes Seamless Gutters - Home Facebook
Request a quote
Reviewed in September 2016
<p>Very Professional company.. Company rep came out and measured for sizing. He explained to me my options and efficiency ratings compared to costs. The unit was installed as promised and on time. Very neat and organized job. When trim out time came, technician came in with boot covers on his...
Southern Air of Mississippi
Request a quote
Reviewed in March 2008
I've used them for 16 years. They are wonderful people. I couldn't say enough of them. They are timely. They pay attention to my yard. If for some reason they can't make it on their scheduled day, they call and ask if they can come the next day. They are just really nice people. They haul off...
ORGANIC DYNAMICS
Request a quote

Find Sandblasting pros in Jayess

ALCOL Company LLC

New to Angi

Exterior Surfaces - Sandblasting

Serving Jayess, MS and surrounding areas

Approved

Small jobs welcome

Offers commercial services

ALCOL Company is a Louisiana-based contractor specializing in sandblasting, protective coatings, fabrication, and civil construction. We take pride in delivering high-quality workmanship, reliable service, and durable results across every project. From industrial facilities to heavy equipment, we bring experience, precision, and integrity to the job.

Request Quote

Pro Level Moving Services LLC

5.0(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"Very well. Came in to get it done ASAP and they worked hard and fast. Very happy with the service. I will recommend them to anybody needing what they offer there services for. Very courteous and very pleased to do the work. Could not ask for better."

+79

Recommended by100%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

Free estimates

Emergency services offered

"It was a great experience. Communication and customer service was excellent. Service was exceptional. Would recommend them to others."

+14

Recommended by100%of homeowners

Request Quote

Durden's Maintenance Services LLC

4.6(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2017

Free estimates

Emergency services offered

"I definitely would hire them again and highly recommend them to anyone who needs their services."

Recommended by95%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

Free estimates

Emergency services offered

"Faulk Lawn Services did a great job taking care of my yard & home needs as if it was their own. Amazing detail to work! The end results couldn’t have been better! Pricing, Professionalism, & Productivity is top notch! Owner Julius will deliver definitely 5-stars!"

+11

Recommended by100%of homeowners

Request Quote

Renew Dustless Blasting & Surface Restoration

5.0(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2019

Free estimates

Offers commercial services

"very dependable ---came on time and did outstanding work"

Response time2 days

Response rate85%

Recommended by66%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2022

Free estimates

"The crew showed up on time ready to work. Very professional and explained what services they would be preforming in great detail to me and my family. Prices were very reasonable and highly recommend for any job big or small."

+10

Recommended by100%of homeowners

Request Quote

Crystal Clear Exteriors LLC

5.0(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2022

Free estimates

"Everything was done to perfection. They were very thorough and very professional. I would most definitely recommend and refer them to anyone. Became I will for sure use them again myself."

+15

Recommended by100%of homeowners

Request Quote

Luke's Painting Company

4.4(

)

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2017

Free estimates

Credit card accepted

"Luke is extremely professional and the service that he provided was timely and well done. He communicates well and we always knew when our work was going to start and finish. Afterwards he communicated with us concerning the job and whether or not we had any concerns or were pleased with the job. If we had had some issues he would have immediately come to fix them but we were very satisfied with the job. I would recommend Luke’s service to anybody."

+76

Recommended by93%of homeowners

Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Jayess, MS and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"Great. Excellent work!! Would recommend to anyone needing carpentry work or most any work needed. Will use again."

Installation of custom painted bifolding closet doors

+103

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 14

Sandblasting Services questions, answered by experts

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous.

Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.

Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

The Jayess, MS homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
Jul 20, 2026Jul 20, 2026
How Much Does It Cost to Rent a Sandblaster? [2026 Data]
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
Nick P. Cellucci
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Sandblast? [2026 Data]
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Sandblasting Services
Wondering who to hire to sandblast? Learn how sandblasting services work, which contractors to call, and how to choose the right pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sandblasting Pro
Learn how to hire a sandblasting pro for your project. Find qualified professionals, ask the right questions, and get expert surface cleaning.
Angi
•
Aug 27, 2026Aug 27, 2026
Sandblasting: Everything You Need to Know
Planning a sandblasting project to restore brick or metal? Learn about sandblasting costs, preparation steps, and how to hire the right local pro.