Get matched with top interior painters in Jayess, MS

In many cases, professionals can completely remove certain types of smoke damage from walls and ceilings, but it’s only possible if the damage is minor. For more extensive damage from major fires, you’ll likely need to replace the damaged materials entirely. Some items, like upholstered furniture, are much trickier to clean and might need to be replaced even if the smoke damage is minimal.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

Distilled white vinegar can help you remove candle wax from surfaces like countertops. You’ll need to scrape off most of the wax and use the distilled white vinegar to help soften and remove the rest and leftover residue. Keep in mind that while it’s possible, using distilled white vinegar isn’t an effective method for removing wax compared to the methods listed above.

To fix bubbling paint, scrape away any loose or blistered areas using a putty knife. Lightly sand the surface to smooth out rough edges and create a level finish. Clean the area thoroughly to remove dust, dirt, and any residue. Once the surface is clean and dry, apply a quality primer suited to the material you're painting. Finally, repaint the area, making sure to work in proper temperature and humidity conditions to prevent new bubbles from forming.