Get matched with top foundation drain installation pros in Hickory, MS

Not all window wells have a formal drain, but they all require a method for water to flow away from the window. Some wells are connected to an interior or exterior drain tile, which is the most effective solution. Others rely on a deep layer of gravel or crushed stone that allows water to filter down into the soil.

However, if a window well lacks a proper drainage system, it can lead to basement seepage, costly water damage, mold growth, and potential foundation damage. This is especially true in areas with heavy rainfall or expansive soil.

If your window well doesn't have a drain or is not draining quickly enough, you have a few options. For gravel-based systems, the stone may have compacted and needs to be improved. For a more robust solution, you can hire a plumber or window installer to connect the well to a drainage system. This can also be a DIY project using a shovel or auger.

It depends on what caused your basement flooding, the extent of the problem, and the risk of the flood continuing. If your flood is coming from a septic system or sewer line, breathing in the sewer gasses can be dangerous, so you should vacate. If the flood occurs from an ongoing natural disaster, relocating to a safe area might be wise. If you just have a plumbing leak or rainwater coming in, you can likely stay in the house if you don’t have electrical lines down there, but make sure you call in professionals to fix the issue immediately.

You should take care of any sign of water in your basement, whether it’s dampness after heavy rain or puddles of water on the floor. Besides potentially causing a health hazard, the moisture can damage your home’s structure and foundation. Furthermore, mold can grow quickly and spread throughout the rest of your home. With mold remediation costs ranging between $1,200 and $3,400, it’s best to avoid mold issues by fixing the leak.

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to drain wastewater and solid waste into the municipal sewer system or a septic tank. For fixtures below this level, like those in a basement, gravity cannot move the waste upward. The ejector pump provides the force needed to pump the sewage up to the main line. Without one, wastewater from below-ground fixtures would back up, potentially causing a sewage overflow and flooding. If all of your plumbing is on the main floor or higher, gravity is sufficient and an ejector pump is not needed.