Get matched with top concrete cutting pros in Hatley, MS

Q: Can metal roofing be cut with a circular saw?

• <div><p>While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The <a href="https://www.angi.com/articles/experts-discuss-metal-roof-paint-benefits-cost.htm">cost to paint a metal roof</a> again to avoid this damage is typically an additional <b>$0.50 to $1 per square foot</b>.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: Can you cut up a box spring?

• <div><p>Yes, you can cut up a box spring., but you&rsquo;ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.</p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your concrete cutting project in Hatley, MS?

Select your specific project to find the pro for you.

Verified Reviews for Concrete Cutting pros in Hatley, MS

*The Angi rating for Concrete Cutting companies in Hatley, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

*The HomeAdvisor rating for Concrete Cutting companies in Hatley, MS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Concrete Cutting needs.

Last update on July 07, 2026

Reviewed in July 2026
He subbed out our pool to someone else who made a mess of the concrete. He promised to fix it. Been in contact with him but have seen no effort in rectifying the situation. He still owes us a cover, and money we had left from the financing. It has made us upset cause we thought of him as a...
Estrada Pools & Construction
Request a quote
Reviewed in November 2025
They did an excellent job clearing the land. I explained what I wanted, and they went above and beyond. I would highly recommend.
Dobbs & Sons Earthwurx
Request a quote
Reviewed in January 2025
Ben and his team did a perfect job. We gave them a picture of two decks that we wanted built on our house and the result was exactly as picture. Great job and very kind person to work with.
House Busters
Request a quote
Reviewed in October 2023
Friendly efficient fast I am glad that you sent him to me for the work that I needed done I would recommend Mr. Davis to all my family and friendsâ ¦
Davis Painting and Home Repair
Request a quote
Reviewed in July 2023
have not got landscaper in yet waiting for dirt work to be done by another company. will definitely use Branch Out
Branch Out Landscaping & Lawncare
Request a quote
Reviewed in April 2022
Jay Cotton and crew did an awesome job. They cut, removed and cleaned up debris from a hickory tree that was too close to my daughters house. While there they removed the trunk and roots from a fallen tree caused by a storm. At my house removed 4 huge limbs from my 50 yr old oak tree that...
Angry Beavers Tree Service Company, LLC
Request a quote
Reviewed in October 2020
The work went very well and done in a very timely professional manner, also they cut the trees and hauled all of the debris. Cleaned up very well. I was pleased and would recommend the business to anyone. Thank you.
M & J Overstreet Tree Service
Request a quote
Reviewed in April 2017
Did an amazing job on my concrete slab, very professional and clean work. Just wished it had been a little longer for parking the cars on. Offered to come back and do the work for free, all I would have to do is pay for the extra concrete. Overall, I was very satisfied with hisâ work.
The Grass is Greener Landscape Services, LLC
Request a quote
Reviewed in July 2015
<p>They didn't do a very good job. The tub is not leveled correctly so the water just stands and doesn't drain properly. There are gaps in the wall where you can see through to the next room when standing in the shower. The shower surrounds are crooked and the tub is not really fastened down...
Mr. Rooter Plumbing of Tupelo and Oxford
Request a quote
Reviewed in January 2012
They do a really good job. The price depends on what we are having them do. We bought palm trees, did all the landscaping and redid our yard completely so it was very expensive. We spent about $16000. They did a whole lot when we moved into our new house. We didn't have a backyard and they...
MURPHY'S LAWN & LANDSCAPE INC
Request a quote

Find Concrete cutting pros in Hatley

Boles Concrete Finisher

5.0(

)

Concrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2019

Free estimates

Emergency services offered

"He did a great job!!!!"

+23

Recommended by100%of homeowners

Request Quote

Thigpen Septic Tank Service

4.7(

)

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Hatley, MS and surrounding areas

Credit card accepted

"Very professional service. Price was as quoted and less than local competitors. Showed up a little late but contacted us to let us know he was running behind first. Took about an hour to complete the work. Would definitely use them again."

Recommended by96%of homeowners

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2024

Credit card accepted

"Mr. Corbin was not only a phenomenal welder for my project, but also punctual, communicative, fairly priced, and above all, a truly good man."

Recommended by100%of homeowners

Request Quote

Jarmon and Son's Construction

4.6(

)

Concrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"It was done in a timely manner and I was very pleased with the results.
"

Recommended by100%of homeowners

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For BusinessConcrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2019

Free estimates

Credit card accepted

"Great work done by these men. I would HIGHLY recommend Mike and nailed it, llc for any work you need done to your house or business! They were very easy to deal with from start to finish and had the best work ethic and manners you could ask for. Mike new exactly how to bring this bathroom to life and I love it and I couldn’t have asked for a better job well done."

Recommended by100%of homeowners

Concrete - Sawing or RemovalConcrete - Sawing or Removal- For Business

Serving Hatley, MS and surrounding areas

Free estimates

"Larry’s Grading Solutions did an exceptional job clearing my woods. The work was meticulous and detailed. The price was most competitive. Larry and his crew are some of the kindest people you’ll ever meet."

+19

Recommended by100%of homeowners

Concrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2010

Free estimates

Warranties offered

"Great job, very professional, exceeded expectations. Highly recommend."

Response time8 hrs

Recommended by100%of homeowners

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2015

Free estimates

Warranties offered

"Andrew from Xtreme Concrete was very professional and checked with me often for specific things that I wanted in the finished job. The crew was efficient and respectful of my property and went beyond my expectations. I would highly recommend Xtreme Concrete for any project."

+56

Response time1 day

Recommended by100%of homeowners

Request Quote

Solid Ground Solutions

4.7(

)

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"I had my drive way done. Sold ground solutions done an awesome job. I will recommen this company. Angela K"

Response time1 day

Response rate100%

Request Quote

The Grass is Greener Landscape Services, LLC

3.4(

)

Concrete - Sawing or RemovalConcrete Flatwork - Repair & Resurface

Serving Hatley, MS and surrounding areas

In business since 2000

Free estimates

Credit card accepted

"Todd Sorrell did an awesome job! He was patient with me and educated me about what I really needed to do 👍😀 I would recommend him for any job. Period!"

+13

Response time2 days

Recommended by76%of homeowners

Request Quote

Showing 1-10 of 28

Concrete Cutting questions, answered by experts

While a high-speed circular saw will cut through metal, and even cut through multiple sheets at once, the fast-spinning saw blades create a lot of heat. This heat can damage paint and other protective coatings, leading to serious problems like rust over time. The cost to paint a metal roof again to avoid this damage is typically an additional $0.50 to $1 per square foot.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

The Hatley, MS homeowners’ guide to concrete cutting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Stephanie Mickelson
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Cut a Concrete Wall for a Door? [2026 Data]
Looking to add utility and easier access to your basement? Use this guide on the cost to cut a concrete wall to add a door to your basement.
Xiao Faria daCunha
•
Jul 10, 2026Jul 10, 2026
How Much Does Concrete Removal Cost? [2026 Data]
Time to get rid of that old chipped and crumbling walkway? Concrete removal costs can add up, but you have options to simplify the process. Learn more here.
Haley Nothstein
•
Jul 15, 2026Jul 15, 2026
How Much Do Poured and Precast Concrete Walls Cost? [2026 Data]
Discover how much concrete walls cost based on factors like their size, material, location, design, and local labor rates.
Dan Simms
•
Jul 21, 2026Jul 21, 2026
How to Cut Concrete for All Skill Levels
Cutting concrete is a daunting task unless you have the right tools and know-how. Find out the methods for how to cut concrete for all skill levels.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
How to Cut Concrete Pavers: 3 Methods to Do the Job Correctly
Have a paver patio project and need to know how to cut concrete pavers? Find out all the DIY options you have for getting your pavers to fit properly.
Dan Simms
•
Jul 9, 2026Jul 9, 2026
Ultimate Concrete Tools List for Your Home Projects
Looking to tackle concrete projects in and around your home? Use this concrete tools list to make sure you have the right tools to get the job done.