Get matched with top sewer cleaners in Conehatta, MS

A sewer cleanout typically looks like a white or gray PVC pipe with a removable cap. It's often located either in your yard or basement, depending on your home's plumbing configuration. The cleanout pipe is designed to provide easy access to your sewer system for maintenance and inspections. It may be flush with the ground or slightly elevated, making it distinguishable from other pipes. When you remove the cap, you can access the sewer line directly or determine its direction, which can be helpful when you need to locate your sewer line from your house to the street.

Sewer gas in any location can cause eye and respiratory irritation if you’re exposed at low levels, or more severe symptoms if you’re exposed at high levels—but fortunately, the fresh air outside means it’s less likely to affect your physical health. However, sewer smells outside can still indicate significant plumbing problems that will need to be dealt with, such as a potentially damaged sewer line or roof vent pipe.

If your drain doesn’t have metal crosshairs or crossbars, you should use a tub drain extractor. These tools create a grip on the drain so you can turn it using a 1/2-inch ratchet drive, drain key, or wrench. Your drain may not have crosshairs if it's old and broken.

First, find the cleanout pipe in your yard. Unscrew the cap—you may need a wrench to do so. Then, get a drain snake. You can use a non-motorized one, but a motorized snake will make the job a little easier. Feed the snake through the pipe until it reaches the clog. Spin the snake continuously, but don’t try to feed it through the pipe anymore. Keep spinning until you feel it break the clog apart.