Get matched with top floor polishers in Columbus, MS

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

The cost to polish floors averages around $200 per room, but you could pay anywhere from $100 to $300. Some factors that influence the total cost of floor polishing include the following:

• Square footage of flooring

• Type of floor 

• Whether you need floor repairs done beforehand

• Whether or not you want professional floor cleaning done beforehand

Since square footage is the most significant cost factor, you might get a more accurate estimate by using the average cost per square foot for floor polishing, which is between $1.00 and $2.50.

Cleaning floors is a relatively easy DIY job, but paying for a professional cleaning service is worthwhile if you don’t have the time to dedicate to cleaning or if you have particularly dirty floors, deep-set stains, or wooden floors that you might damage during the cleaning process. A professional house cleaner will have the tools and experience necessary to remove dirt, pet hair, debris, and even stains and discoloration from your floors without damaging them. The service is also relatively affordable, making it a great investment if you don’t have the time or tools to do it yourself.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.