Get matched with top backsplash installation pros in Clarksdale, MS

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.

When considering the types of grout for your project, unsanded grout is the best choice for penny tile. Unsanded grout can fit better into narrow spaces, like those between the small penny tiles, and it’s easier to smooth out for a seamless finish. However, if you’re unsure, check with a tile installation pro to determine which grout is best for your specific project.

You can use sanded or unsanded grout for a shower pan, but sanded grout isn’t the best option for shower walls. For those areas, you’ll want to use unsanded grout, which works well on vertical surfaces and is less likely to slump than sanded grout. Alternatively, you can use epoxy grout for shower walls.

It’s possible to walk on a clay tile roof, but you run the risk of breaking or cracking the tiles if you’re not careful, so it’s best not to walk on it if you can avoid it. If you or a contractor needs roof access, be sure to distribute your weight evenly and step on the portions of tile that are also supported underneath, which depends on your tile design. Walking on any roofing material is inherently dangerous, so wear rubber-soled shoes and use safety equipment if you need to access your roof.