Get matched with top water heater pros in Belden, MS

Basements, specifically those without any air conditioning, are the best location for a hybrid water heater. These rooms are less likely to experience extreme temperature fluctuations, which can affect your hybrid water heater’s efficiency and performance. Basements often have more than enough space for their tanks and proper air circulation. Hybrid water heaters can also be a bit noisy, but putting them in your basement will keep the noise away from your main living areas.

It is very difficult and dangerous to install your own water heater, so we strongly recommend against tackling this as a DIY project. Not only will you need to wire your water heater, but you’ll also need to connect plumbing to the intake and outlet. Sweating copper pipes and connecting wiring properly are skills most DIYers don’t have, and even if you do feel confident you can do it, working with water and electricity always leaves the potential for electrocution. Hiring a local water heater installer is well worth the investment.

One of the primary benefits of a heat pump water heater is how cost-effective it is. How much you save will depend on your water usage and electricity costs. That being said, we can ballpark savings for the average home of between $100 and $500 per year. You can increase that savings rate by researching and applying available energy incentives available in your area. If you really want to focus on cost, consider a tankless water heater.

The time it takes to install or replace a water heater depends on the type of heater and the complexity of the job. A professional can typically replace a standard tank-style water heater in one to three hours. However, if the work area is tight, such as a small closet or crawl space, the job could take four to five hours. Replacing an existing tankless unit takes about two to three hours, while upgrading from a tank-style to a tankless water heater is more complex and can take four to six hours. The project will take longer if you are switching fuel sources, such as installing a gas heater which can add about an hour to the timeline, or if the unit needs to be relocated.