Top-rated sandblasting pros.

Best sandblasting pros near Macon, MO

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Macon, MO?

Select your specific project to find the pro for you.

Top-Rated Sandblasting pros in Macon - Updated Nov 2026

Avatar for RNC Painting LLC
RNC Painting LLC
4.6(
69
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Macon, MO and surrounding areas

In business since 2010

Free estimates

Credit card accepted

"RNC was very responsive to my project. We had an upfront price within 24 hours and agreed to get the project started. The communication between us was on point. I knew what was happening every step of the way. The project was completed in the time frame specified. Robert and Carla were very detail oriented, down to the position of the screws on the cover plate going the same direction as the switch. We have hired them again to paint the bathroom."
scraping ceilings
Priming ceilings
Additional Photos
Additional Photos
Additional Photos

+10

Recommended by89%of homeowners
Sandblasting Services FAQs, answered by experts

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

Yes, many professionals use dustless or water-based blasting methods for reduced environmental impact.

Costs depend on paint type, surface condition, labor, and required prep work for repainting.

The Macon, MO homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.