Get matched with top drain cleaners in Joplin, MO

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Clean regularly with non-abrasive cleaners, avoid pouring grease down the drain, and check for leaks under the sink.

Yes, frozen pipes can prevent a toilet from working correctly. If the pipes are frozen, water cannot flow, which means your toilet tank won't be able to refill after a flush. This will prevent the toilet from flushing again. Depending on which lines are frozen, the ice can also block the drain pipe, preventing water from flushing away.

As a temporary workaround, you can manually add water to the tank for each flush. To clear a frozen drain pipe, you can try filling the toilet bowl or tank with warm water and flushing to help thaw the ice. However, the best long-term solution is to unfreeze the pipes to get your toilet back in working order.

No. You should dispose of all oil-based finishing products through a local hazardous waste program. Not only can oil-based finishes be hazardous for the environment if disposed of in the sink, but they can cause clogs in your pipes and stop up your drains. Most municipal garbage or waste disposal companies have a specific location or pick-up schedule for hazardous materials, so that’s your best bet to get rid of excess finishing products.