Get matched with top woodworkers in Holts Summit, MO

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: How long are landscape timbers?

• <div><p>Most landscape timbers are <b>8 feet</b> <b>long</b>, but some are also available in 10-foot and 12-foot lengths. Choose the length that will allow you to install landscape timbers using the least amount of cutting to fit. Shorter timbers will allow you to more easily create angles and shorter plant bed sides.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: Does homeowners insurance cover floor joists?

• <div><p>Homeowners insurance may cover damaged floor joists, depending on your policy. Insurance typically covers issues from storms, fires, or water damage from burst pipes. However, don't expect your insurance company to cover damage from wear and tear, poor maintenance, or termites. </p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Holts Summit, MO?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Holts Summit, MO

*The Angi rating for Woodworking companies in Holts Summit, MO is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Holts Summit, MO is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on June 26, 2026

Reviewed in June 2026
John and his crew did an amazing job they were very efficient and did amazing work for me and my wife we had them build a 18x32 composite deck and they built it very strongly and beautifully you can tell they really take their time with there work and care about the little things that most...
Your Right Hand Man Home Improvement Specialist
Request a quote
Reviewed in September 2025
I found him on Angie’s list, and am very satisfied with the job they did. We were selling our house and had the inside painted including woodwork and crown molding. He gave a reasonable estimate. I was very pleased with the job. They went above and beyond by caulking the baseboards and molding....
The Ozark Painter
Request a quote
Reviewed in July 2025
The work was to construct a roof over my existing concrete deck. Their customer service is excellent and they treat you as a long lost friend or family member. They constructed the roof in a timely manner with excellent skill and workmanship. The final project was beyond my expectations. This is...
Missouri Metal Roofing, LLC
Request a quote
Reviewed in May 2024
The job was when when he said it would be done. I said to leave the sticks and stumps there and they picked them up and see them nice and neatly by the fence with out asking them to do. Cleaned up so good it looked like no one had work done to my trees
Fosters Tree Services LLC
Request a quote
Reviewed in April 2024
Paul and TJ did a great job and were also just so nice to have around. They are reliable and professional perfectionists. I had a small area (a high stairwell and hall) in an old house with plaster walls - not a job everyone would want to take. They repaired cracks and blended everything...
Quality Affordable Painting
Request a quote
Reviewed in March 2024
We are very happy with the new deck stairs and patio expansion. They were quick to contact me after my inquiry. They were quick and professional. Their work is great. We will keep their contact for future projects.
Your Right Hand Man Home Improvement Specialist
Request a quote
Reviewed in October 2022
Steve bid the work and was quick to get the team on the job. SEB installed a beautiful partial wooden privacy, partial black chain link (so we could still see the wooded lot), and a black railing on the retaining wall. It looks exceptional. The quality of work is impressive. The project...
SEB Fencing Company
Request a quote
Reviewed in April 2022
The whole team at AJ Construction was fantastic to work with from start to finish. They were able to fit us in between jobs when they had a cancellation, so we couldn’t be happier with the turn around from quote to finished kitchen. The painted cabinets look fantastic and we’ve had other...
AJ Construction, LLC
Request a quote
Reviewed in March 2022
We are thrilled that we selected Continental Siding to come and do this job for us! had a house with painted wood. They were fantastic with everything they did! They were very professional, efficient, friendly and the quality of their work was the best!! We are so happy we decided to use...
Continental Siding Supply, Inc.
Request a quote
Reviewed in February 2022
HIghly recommend! Kevin is great with communication and keeping on track with the project. We own a house in St. Charles with my daughter that had two very large trees in the front that needed to come down. One was a blue spruce and the other a red cedar. The trees were encroaching on the...
Trees By Drees
Request a quote

Find Woodworkers in Holts Summit

VS Woodworking

5.0(

)

Furniture - Build Custom

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2018

Free estimates

Offers commercial services

"Working with Vernon was so easy. He communicated the progress on my unit through the project. He shared pictures along the way as well. He even came up with a simple solution to a small issue we had with our walls not being completely straight and out floors not being entirely level back when the home was built 20 years ago. He made the unit completely level and came up with a solution to hide how he made it level. The unit is beautiful and I would recommend Vernon to anyone looking to have quality woodworking done at their house."

Response time4 hrs

Response rate85%

Recommended by100%of homeowners

Carpentry Framing - InstallInterior Trim and Decorative Moldings - Install

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2012

Free estimates

Offers commercial services

"Brandon not only helped us out in a major pinch, but he saved us money and got the job done in half the time quoted by comparable businesses. 10/10 would recommend his friendly amd wide range of service."

+29

Response time2 days

Recommended by100%of homeowners

Closet - BuildInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2024

Free estimates

Small jobs welcome

"Did a great job! Prompt courteous!"

Response time3 hrs

Response rate85%

Recommended by80%of homeowners

Gazebo or Freestanding Porch - Repair

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2013

Free estimates

Small jobs welcome

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call or text today!

Response time10 mins

Recommended by100%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Everything was great from start to end. Jeanette and Brayden were easy to talk to and straight to the point, they both made sure everything was to satisfaction and met my needs. Overall great service and I would definitely be looking forward to doing business again in the future for other projects. Communication was awesome !"

26 neighbors recently requested a quote

Request Quote

Samuel Everett

New to Angi

Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build+5 more

Serving Holts Summit, MO and surrounding areas

Approved

Hello, I have been doing carpentry work and am looking for projects in the Columbia area.

Request Quote

Stoneys Home Improvements LLC

New to Angi

Carport (Wood) - Build

Serving Holts Summit, MO and surrounding areas

Approved

Free estimates

Small jobs welcome

Credit card accepted

My name is Kyle with Stoney’s Home Improvements. I offer a wide variety of constructions jobs. Contact me and we can get you taken care of.

Request Quote

Bex Construction Services

New to Angi

Arbor, Pergola or Trellis - Build Custom - For Business

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2013

Free estimates

Offers commercial services

Response time7 hrs

Request Quote

Jones Floor and More

New to Angi

Closet - BuildInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Holts Summit, MO and surrounding areas

Approved

In business since 2024

Free estimates

Credit card accepted

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

2 neighbors recently requested a quote

Request Quote

Berger's Table Pad Factory

4.8(

1,345

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+8 more

Serving Holts Summit, MO and surrounding areas

In business since 1983

Free estimates

Credit card accepted

"price is better other places magnets do not work keeping panels connected"

Recommended by93%of homeowners

Request Quote

...

Showing 1-10 of 86

Woodworking questions, answered by experts

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

Most landscape timbers are 8 feet long, but some are also available in 10-foot and 12-foot lengths. Choose the length that will allow you to install landscape timbers using the least amount of cutting to fit. Shorter timbers will allow you to more easily create angles and shorter plant bed sides.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Homeowners insurance may cover damaged floor joists, depending on your policy. Insurance typically covers issues from storms, fires, or water damage from burst pipes. However, don't expect your insurance company to cover damage from wear and tear, poor maintenance, or termites.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

The Holts Summit, MO homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
May 30, 2026May 30, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Audrey Bruno
•
May 22, 2026May 22, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
May 21, 2026May 21, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.