Best pool and spa technicians near Dexter, MO

Generally, it is more cost-effective and energy-efficient to leave your hot tub on all the time rather than turning it on and off. Reheating a hot tub from a cold temperature consumes a significant amount of energy, so maintaining a constant temperature is usually more economical, especially with frequent use.

For daily or weekly use, it's recommended to keep the water at a constant, reduced temperature, such as between 80 and 95 degrees Fahrenheit, and then increase it to your desired temperature before getting in. If you know you won't be using the hot tub for an extended period, you can lower the temperature to save on energy costs. However, if you use it very infrequently, you can turn it off completely, as long as there is no risk of the water freezing.

To refill a hot tub after winter, start by opening up the tub and giving it a quick cleaning. If you use antifreeze, drain out the water then grab a hose and thoroughly clean the tub shell out, spraying water into each jet of the tub. 

Reconnect the hot tub and turn the power back on. When it’s time to fill the tub again, insert the hose into the filter well (if available). Avoid trapping too much air in the water lines, which can cause the pump to lock up when it starts again. Add the necessary chemicals and start the heating process. It will take some time—most of a full day—for the water to heat up again.

Yes, you can use silicone or epoxy hot tub repair kits to repair cracks in a hot tub. Always read the manual to see what the manufacturer recommends before attempting to repair a hot tub.

The cost to repair a hot tub or spa ranges from about $170 to $550, depending on the repairs needed. Some of the most common hot tub repairs include leaks, clogged filters, and tripped GFCI breakers. If it’s an electrical problem, you should contact a professional hot tub repair service. Don’t DIY electrical repairs on a hot tub, as poorly repaired wiring can make the hot tub a serious electrocution hazard.