Get matched with top plaster repair specialists in Craig, MO

If your home was built before the 1940s and was not remodeled in the past 50 or so years, you probably have plaster walls. Aside from assuming, there are some practical ways to tell if you have plaster walls, including the following: If you knock on the wall and it feels solid, not hollow, if you can’t insert a thumbtack easily, if there are cracks that look like spiderwebs, or if your home has curved, arched, or swirled walls, doorways, or window openings.

If you have an unfinished basement or attic, you could examine the backs of any finished walls to check, too.

Plaster is a beautiful finish but is labor-intensive to install and remove. It’s vulnerable to cracking and more sensitive to moisture variance than drywall. Installing plaster on a new wall is an expensive process that can take days to weeks, depending on the scope. Removing a plaster wall can also be quite expensive and time-consuming.

Yes, to some extent, you can speed up the time it takes plaster to dry and cure. Choose a time of year when humidity levels are somewhere in the middle, neither too high nor too low, to allow moisture to evaporate from the plaster effectively. Also, open a window or set up a fan in the room to improve ventilation.

Don't use a dehumidifier in an attempt to speed up drying time, as a dehumidifier may suck moisture from the air too quickly, leading to crumbly plaster.

While it’s most common to sand plaster dry, it is possible to wet-sand plaster, too. Doing so can reduce the amount of plaster dust released into the air and make it easier to work in smaller, more delicate areas (such as around wall trim). However, some people find that wet sanding leads to more imperfections, which is why larger walls are more often dry sanded to ensure an even finish.