Get matched with top epoxy flooring pros in Brookfield, MO

Yes, you can seal old or existing concrete, but proper preparation is crucial. The concrete surface must be clean, dry, and free of any incompatible old sealant. To check if an old sealer is present, drip a few drops of water onto the surface; if the water is absorbed in under five minutes, it's ready to be resealed. If you plan to use the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are using a different type of sealer, the old one must be completely removed. Before applying the new sealer, thoroughly clean the concrete and repair or fill any cracks to ensure a smooth, well-prepared surface.

The lifespan of stained concrete can range from five years to a lifetime, depending on the type of stain used and how well it is maintained. Acid-based stains penetrate the concrete and can last 20 years or more, while water-based stains are less durable and may last around five years, especially on outdoor surfaces exposed to UV light and weather. To preserve the color and extend the life of the finish, stained concrete should be properly sealed and then resealed every three to five years. Factors like foot traffic, climate, and proper initial application also affect its longevity.

Concrete is extremely porous. Without a proper sealing, it will absorb just about anything it comes in contact with, including water and ice. During the colder months with freeze-thaw cycles, this could cause the concrete to crack and become damaged in other ways. You always want to seal your cleaned concrete surfaces after they’ve completely dried out.

It typically takes 1-2 days to coat a concrete floor, including preparation and curing time.