Get matched with top countertop and backsplash pros in Bernie, MO

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Concrete countertops usually cost more than granite. The average overall cost to install concrete countertops is $50 to $150 per square foot. Granite countertop costs average between $40 and $50 per square foot. While concrete materials might be cheaper than slabs of granite, the labor costs are considerably higher as it takes more time, specialized equipment and skill to form customized concrete countertops.

The least expensive way to build a kitchen countertop is to choose an affordable material. For example, laminate countertops cost about $1,250, while Corian® countertops cost $4,000 on average. Common wood and laminate tend to be the most affordable and DIY-friendly, which will save you the cost of labor. Otherwise, look for lower-end solid surface countertops or ceramic and stone tile. These cost less than natural stone slabs.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.