Top-rated lead testing and removal specialists.

Get matched with top lead testing and removal specialists in Belton, MO

Enter your zip and get matched with up to 5 pros

Need a pro for your lead testing and removal project in Belton, MO?

Select your specific project to find the pro for you.

Find Lead testing and removal specialists in Belton

Avatar for Smart Environmental Services LLC
Smart Environmental Services LLC
4.9(
111
)
Toxic Lead - TestingToxic Lead - Abatement

Serving Belton, MO and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

"Smart Environmental has excellent customer service and incredibly honest people. They saved us thousands of dollars by stressing the importance of testing our old vermiculite insulation rather than assuming it had asbestos. While another company took a look at our attic and gave us a quote for over $3,000 of asbestos remediation, Pony described that many inspectors see old insulation and assume it is asbestos, but that is not always the case. Pony took a sample from our attic, got it tested for us, and promptly sent us the negative test results the next day. We could not be more grateful for Ponys honesty and the diligence he took in actually testing our insulation instead of just assuming we needed a costly remediation."
Technicians At Work
Basement mold removal job
Basement mold removal job
bathroom equipment
kitchen equipment

+1

Response time1 day
7 neighbors recently requested a quote
Recommended by97%of homeowners
Avatar for AdvantaClean of Kansas City
AdvantaClean of Kansas City
4.6(
46
)
Toxic Lead - Testing

Serving Belton, MO and surrounding areas

Approved

In business since 2011

Free estimates

Emergency services offered

"Terrific - huge relief! Wish now that I had not procrastinated getting an estimate. I simply had no time previously and now that I had 2 weeks' time off for the Christmas holiday season, decided I would undertake what I assumed would be the unpleasant task of researching companies, securing an estimate, and beginning to face what I was sure was a significant mold problem. I have a 58 year-old home (which we love and hope to remain in forever - as we moved here for the ranch layout and hardwoods - perfect for 2 family members in wheelchairs). Unfortunately, our beautiful but older home has old, corroding copper pipes in the walls - and pipe in the wall beneath kitchen sink had a few leaks that leaked over time into the wall. After plumbers cut open sheetrock to repair sections of leaking copper pipe (twice) ...as the home warranty plan we have is great and covers removal and replacement of corroded sections of copper pipe for a small co-pay (but only covers removal & replacement of a few inches of pipe around the corroded area rather than covering replacement of the entire 5 ft run of pipe) and we've had a couple sections of pipe in the wall under sink replaced. Each time a section of pipe was replaced, plumbers opened up more sheet rock in the area to expose the pipe - which also exposed mold on a 2 x 4 and insulation in that area. Plumbers had also quoted cost of replacing the entire run of pipe - just in case I ever decide to replace my lower kitchen cabinets, noting that would be a good time to get rid of the entire run of copper pipe. So - back to the mold issue I had avoided for so long, assuming it would be expensive. After getting a few names of mold remediation companies from Angie's List, I quickly read the reviews & noticed several reviews for Advanta Clean of Kansas City mentioned this was not a company looking to secure work if professional assistance was not truly needed and often simply provide a recommendation and advice on how the homeowner can take care of their smaller-than-anticipated work on their own and avoid costly repairs. Reading the reviews provided some relief, and I hoped to get a visit and free estimate from Kevin, as reviews of him were really good. What I actually experienced when Kevin visited our home can't easily be described. My worries and concerns were immediately alleviated. Kevin was highly professional, describing national guidelines recommendations, noting our issue was less substantial than we had thought, and provided 3 different approaches that could be taken - detailing each. The first approach (and one he recommended) was free - simply cleaning up the area ourselves with vinegar and allow it to dry well, along with using a dehumidifier in the house (as humidity was reading high). The second approach (if uncomfortable cleaning the small area of mold on our own) was in the $350 range plus cost for asbestos testing (necessary in a home of our age to ensure crews would be safe while completing repairs) with asbestos testing through an independent company of our choosing (though Kevin could provide info if needed) running ~$400 (this entire second approach was deemed an unnecessary but available option by Kevin), and the third approach was ~$1200 (which covered a significant amount of work...removing lower kitchen cabinets, all sheetrock & insulation behind them, cleaning up the area and using HEPA fans) which Kevin noted was an 'aggressive' but available approach - should we prefer that. I had feared hearing $5k to $6k - so had done nothing for far too long. I wish I had called earlier!! I now have a plan that costs me nothing for now - which I feel safe with (priceless). And, since I already intended to pull out & replace lower kitchen cabinets after saving up a bit (& also replace the 5 ft run of copper pipe in the wall that started all these issues) I now have a solid idea of what it will cost to do the level of agressive mold remediation that I prefer to do (pulling out/checking/replacing insulation near the area) - once I'm ready to be without a functioning kitchen for a bit. Meanwhile, I am very comfortable managing the small area of visible mold on my own. And, will definitely be calling Kevin at AdvantaClean whenever I get around to replacing my lower kitchen cabinets, to do the level of unnecessary but precautionary checking I'd prefer to do. An outstanding, highly professional company that I will be using in the future, and would recommend to friends and family. THANKS!!"
Additional Photos
Response time3 days
10 neighbors recently requested a quote
Recommended by97%of homeowners
Avatar for Vantage Point Exteriors
Vantage Point Exteriors
3.8(
122
)
Toxic Lead - AbatementToxic Lead - Testing

Serving Belton, MO and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"The service turned out well. They actually ended up siding the entire home. They were very good at designing the color of the siding and had great recommendations since I had no idea what I was looking for. The computer technology was great as far as coming up with the design. I was very pleased with the outcome of the service. The technicians who did the siding were always on time. Scheduling was very easy, as well. Ab"
Additional Photos
Before Vantage Point got the call
Another happy homeowner!
Before Vantage Point got the call.
Another happy homeowner!

+38

Recommended by73%of homeowners
Lead Testing and Removal questions, answered by experts

How you test for lead in your water depends on the source of your home's water supply. If you have municipal water, your local water system may offer to test the water for free or may connect you to a lab that will perform the testing.

If you have a private well that provides drinking water, you are responsible for testing it for lead. Look for a lab that is accredited by your state's Department of Environmental Protection to perform the test.

Properties should be tested for lead every 2-3 years, especially if they are older, have undergone renovations, or show deterioration of paint or interior finishes.

DIY kits are available for basic air quality testing, but professional services provide more comprehensive results and recommendations. While a DIY kit may seem cost-effective, a professional assessment is more thorough. Inspectors are better equipped to catch all pollutants and hazards, and you'll still need a professional to verify and act on DIY test results. Furthermore, some kits don't test for certain pollutants or only detect their presence without measuring specific levels (like mold spores). It's generally better to opt for a detailed professional assessment.

You can paint over lead paint, or “encapsulate” it with a special paint that includes an ingredient called an encapsulant. The EPA approves encapsulation as a lead paint removal method as long as the paint remains undisturbed. Standard types of paint without an “encapsulant” from the big box stores or hardware stores do not meet EPA standards for remediation of lead-based paint.

If the lead paint is in a place that is not easily disturbed and is not flaking or deteriorating, you do not necessarily need to remove it. Lead is toxic when dust particles or flakes from peeling lead paint are ingested. If people are not in the area with the lead paint, it may be safe to leave it in place. You still may want to consider encapsulation with a paint formulated for covering lead-based paint, just for an added layer of protection.

The Belton, MO homeowners’ guide to lead testing and removal services

From average costs to expert advice, get all the answers you need to get your job done.