Get matched with top countertop and backsplash pros in Tracy, MN

Installing new kitchen countertops costs $1,850 to $4,450, with an average price of $3,140. Some materials, like marble and granite, are more expensive than others. Additionally, the size of the countertop impacts the overall price. Labor accounts for 10% to 20% of the overall project cost. Add-ons, like edging and corner treatments, also increase the cost.

You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

The best finish for butcher block countertops depends on their intended use. If you plan to use the surface for food prep and cutting, a food-safe oil like mineral oil or tung oil is recommended. These oils provide a water-resistant, velvety matte finish but require regular reapplication. If the countertops are primarily for appearance or serving, a stain can add color and sheen. Polyurethane is another option, but it tends to show scratches more prominently, making it less ideal if you plan to cut directly on the surface.