Get matched with top wallpaper pros in Spicer, MN

In most cases, it is not recommended to wallpaper over existing wallpaper, as the success depends on the type of paper already on the wall. While you might be able to cover non-coated wallpaper, you should never apply new wallpaper over a vinyl-coated one, which is more common. Doing so can lead to poor adhesion, resulting in bubbles, imperfections, and peeling. It can also trap moisture, potentially causing hazardous mold growth between the layers.

Even if the existing wallpaper is suitable, experts recommend applying only one new layer. Adding multiple layers (more than two total) can cause significant adhesion problems, leading to warping and bubbling. For the best results, the recommended approach is to remove the old wallpaper and all paste residue before hanging the new paper. If you are unsure about your wallpaper type, consider consulting a professional.

The color of the paint, its opacity, and the depth of the texture on the paper all affect how many coats of paint you need to apply to paintable wallpaper. You'll need at least two coats of paint to ensure even coverage. Don’t be surprised if you need to apply three coats if the embossing is very deep or if you use a dark color.

It’s possible to hang your own wallpaper, but the process is tedious and potentially frustrating, and it can be challenging to get seams to line up and look clean and professional. Plus, depending on the type of wallpaper you’re installing, using too much or too little adhesive could cause damage to your drywall or plaster, peeling, and bubbling in the final product. It’s usually a better idea to hire a professional wallpaper installer to do the work for you, as the relatively low cost is justifiable, if only to avoid damage to your walls.

No. If you overlap seams, the wallpaper will not come out flat. In addition to possibly throwing off your pattern match between rolls, overlapping seems necessary. If wallpaper is properly acclimated, and temperature and moisture conditions are optimal during installation, there is no reason to fear shrinkage as it dries.