Get matched with top drain pipe installers in Pipestone, MN

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If the drain is frozen, the pipes connecting to the washing machine are likely frozen. If the hot water trick doesn’t also unfreeze the washing machine pipes, you can gently apply heat with a hair dryer on the lowest setting. Start at the end of the pipe closest to the faucet to prevent pressure from building in the pipes, and make sure the faucet is open to drain the water as it melts.

It can take anywhere from half an hour to a few hours to fix a main line clog, depending on the cause and severity of it. The job should not take more than a day to complete. Keep in mind that the main line is not the same as your home’s sewer lines (which connect to the main line and run to your house). Your city is responsible for any clogs or damage to the main line itself.

French drains may fail when they become clogged with soil granules that slip through the pores of the landscaping fabric and through the holes in the pipe. 

Over time, this debris can build up inside the pipe and prevent water flow. To prevent this failure from happening, regularly flush out your French drain and keep debris away from the inlet grate.