Get matched with top countertop and backsplash pros in Madison, MN

Yes, countertop refinishing really works. It can help give your countertops a new and fresh look and extend their life by up to a decade. Countertop refinishing is a possible DIY project, or you can hire a pro if you prefer not to do it yourself.

Yes, it is possible to cover old countertops with new ones. Using a countertop overlay to cover your existing countertop is a good way to get a totally new surface without removing your old countertops. This method can be more cost-effective and less time-consuming than a total replacement.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, a 12-inch countertop overhang will need support to keep it stable. The exact type of support depends on your countertop thickness and material. Thicker, heavier countertops need extra support, like a corbel or a post, to keep them from sagging or toppling over.