Get matched with top sewer cleaners in Herman, MN

There are a few things that can happen to your sewer system if you don’t fix it. These include rainwater entering it and causing rust and corrosion, dirt and debris leading to blockages, small animals getting stuck inside and clogging your sewer line or entering your home, and shortening the sewer system’s life span. 

Without a cap, nothing prevents toxic and non-toxic gasses like methane and hydrogen sulfide from slowly escaping your sewer system and entering your home and the surrounding atmosphere, resulting in a foul sewer odor throughout your house.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Your sewer line can get grimy quickly. To prevent sludge buildup in your sewer line, pour a mixture of 1/3 cup of vinegar and 1/3 cup of baking soda down each drain in your home once a month. After about 30 minutes, flush the drain with hot water.

Some plumbers recommend 3/4 cup of bleach instead to clean any germs and bacteria that may build up in your sewer line. But this won’t break down any active clogs, and it cannot be combined with vinegar, as the mixture will create a toxic, hazardous gas.

A sewer line should be cleaned at least once every 18 to 22 months. The process takes about 30 minutes or up to 5 hours, depending on the size of the line, how easy it is to access, and how long it’s been since the previous cleaning. If your sewer line hasn’t been cleaned in a couple of years or you don’t even know the last time it’s been cleaned, it’s time to call a pro.