Get matched with top countertop and backsplash pros in Fertile, MN

Yes, you can install a farmhouse sink on an existing countertop—but there are some caveats. You’ll need to precisely measure. It’s best to choose a sink that’s the same dimensions as your existing sink, since your contractor won’t have to cut the countertop. Otherwise, pay close attention to the depth of your counter (the front to back measurement). You don’t want to install something that’s so big it sticks out beyond your countertop and cabinetry.

Yes, laminate (or Formica) countertops often come in precut sizes. It is important to measure your space and then do some research, or take the measurements to a local home improvement store to see if you can get the right size. If you do get precut laminate countertops, you may still have to cut holes for the sink and fixtures.

Yes, it is often possible to replace an undermount sink without removing the countertop, but success can depend on the countertop material. For materials like granite, the process is relatively straightforward. However, laminate or uniquely shaped countertops might need to be removed or modified.

The process typically involves shutting off the water supply, disconnecting the drain and plumbing pipes, cutting through the old silicone seal, and carefully lowering the sink from below. This requires a good understanding of plumbing and the right tools. If you are not confident in performing the replacement yourself, it is recommended to hire a countertop specialist or a plumber to handle the task.

If you need to make curved cuts on your laminate countertop, get out the jigsaw. A jigsaw with a fine blade will allow you to follow curved traced lines. It is important to cut slowly and to let the jigsaw do most of the work with you acting as a guide.