Get matched with top sonic cleaning pros in Brooten, MN

If you wish to forego painting your shingles but still want to give them a fresh look, a deep cleaning is the first step. Clean off any debris from your roof and gutters, and then power wash your shingles to get grime and algae off. To take things one step further, you might even consider installing new gutters to give your home a bright new look.

Inspections should be conducted annually, and minor repairs should be made as needed.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

There are several ways to remove snow from your roof: using a snow rake, salting the roof with calcium chloride, using a rope (cautiously), and using heating cables. It’s important to mention that pretty, fluffy, sparkling snow weighs a great deal, and when physically removing snow from a roof, you should be aware of large snow slabs breaking off. These can weigh hundreds of pounds and are a real danger, so be extremely careful anytime you’re doing this type of work.