Get matched with top marble restoration pros in Brainerd, MN

Deciding between marble and granite for kitchen countertops depends on your personal priorities, budget, and style. Both materials have similar costs for material and installation.

Marble offers a luxurious aesthetic and timeless beauty, but it is more expensive and requires more maintenance. It is susceptible to staining and etching from acidic substances like coffee, wine, or tomato sauce if spills are not cleaned up quickly.

Granite is highly durable, heat-resistant, and easier to maintain, making it a practical choice for busy kitchens.

Both materials should be sealed to protect against damage, but they can still be vulnerable to stains if spills are left on the surface for too long.

There are a few ways to remove calcium buildup in your pipes, but the most natural option involves vinegar, baking soda, and boiling water. To use this method, pour 1/2 cup of vinegar down the drain you're trying to clear, then follow it up with 1/2 cup of baking soda. Place a rag over the drain to create a light seal and leave it for 30 minutes. Remove the rag, then pour a pot of boiling water into the drain. After the water drains, wipe everything down with a sponge.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

No, you cannot use vinegar to polish marble. It is too acidic for cleaning or polishing and can etch the surface. Instead, opt for non-acidic cleaners made specifically for marble. Follow the manufacturer’s directions to ensure proper application and to protect the marble. However, a damp mop can be an effective marble cleaner when used appropriately and as long as moisture is immediately soaked up.