Get matched with top generator install pros in Balaton, MN

You can determine what size generator you need by listing the various appliances it will power during an outage. Write down the start-up watt usage, and then add them all together. 

A 7,500-watt generator will run your refrigerator, freezer, well pump, and lighting circuits without a problem. However, you’ll need an extra 3,000 to 4,500 watts to run your water heater and another 5,000 to 25,000 watts to run your electric furnace. In these instances, a whole-home generator is your best bet for running your critical equipment.

In most municipalities, you will need a permit to install a permanent home generator, including emergency backup, partial-home, and whole-home generators. A permit for a generator usually costs between $50 and $250, depending on where you live. Your electrician or certified generator installer will usually pull the permit for you—and might be required to do so by your building department—but you’ll be on the hook for the cost of the permit. You should ask your installer before agreeing to any work if they will pull the necessary permits for your project.

A home that is 2,500 square feet will likely need a 20kW to 25kW generator. Consult your local generator installer to confirm the generator size needed to power your home before purchasing a new one. Be sure to consider how much power your necessary devices need to run.

Generator size requirements vary wildly among properties, but typical generator sizes are listed below based on home square footage:

• 1,000 sq ft: 6–9 kW

• 1,500 sq ft: 7–10 kW

• 2,000 sq ft: 10–14kW

• 2,500 sq ft: 12–16kW

• 3,000 sq ft: 16–20kW+

Unfortunately, home square footage isn’t always a good indicator of generator size requirements. Instead, you should call in a professional to discuss which items in your home you’d like to run via your generator. They can calculate peak and average consumption for those items and then size your generator appropriately for optimal performance.