"Pictured is the before battery compartment. All rusted and hopeless. Josh invented a perfect plan to weld a tray to the two sides that were not rusted. Worked perfect. Even an RV place commented on the great job he did. What looked like a hopeless cause, turned into solid craftmanship. I Just hope he's available and doesn't get too busy.."
"We hired them to replace some wooden ballusters with iron. They were great to work with, very flexible on things and kept us informed along the way. Products they used were better than others that bid on the project. We would recommend them to others and use them again for future projects."
"The communication from Diamond Cut Solutions was the best I've ever experienced from any contractor of any sort. Friendly, courteous, provided project updates and always on time. Excellent experience."
"Went pretty well, one of my sprinkler lines was hit during the install, but I knew that could be an issue going in. One of my gate latches was welded very poorly, but the company was pretty quick to fix it once I found the issue."
"Roman and the team at A to Z Remodelers & Builders were excellent to work with. Roman was very helpful with any questions we had through the whole process. We had new windows and siding and we couldn't be happier with the results. While working on the windows and siding, we ran into an issue with our deck and some water damage which they made sure to explain my options and how to take care of it. They made sure I was informed of all my options and were able to take care of it so we wouldn't have the issue in the future. When the team was finished working each day, we couldn't even tell anyone had been at our house working because they would do an excellent job of cleaning up after themselves. I couldn't recommend A to Z Remodelers more! Thank you for the excellent work!!!"
Welcome to Q Shop LLC! We offer welding, fabrication, and machining services to businesses as part of the supply chain. We also complete repairs and fabrication services for clients provided they are able to bring the item to our facility. We do not provide services at the customer's site. \nHowever, due to COVID19, we are limiting our services to business to business at this time.
Metalcore Welding and Repair, LLC, is a full service welding company with over 7 years of experience. We are honest, loyal and provide the best customer satisfaction in town. We pay very close attention to detail and owner is always on site to ensure quality work. Call us for a free estimate!
"Overall we were satisfied with the quality of the job but we did run into some issues. Sam said it would take 2 days to complete but it ended up taking 6 full days. Unfortunately I had to use a lot more vacation to be home for this than I anticipated. We ran into some issues with the sub-contractors. One guy got nothing done the day he was there and then never showed up the next day. To Sam's credit, he called in another framer and the work was started as soon as possible. The quality was decent but we ended up having to fix some spots ourselves and add some extra framing to make the areas aesthetically pleasing. The crew members were all polite and cleaned up after themselves, which I always appreciate. Sam is very easy to work with and very professional. He takes his business seriously and has high expectations of his crew. Despite the issues we encountered we were still happy with the work and the price."
we are a family owned welding repair and fabrication shop. we also offer mobile services to better meet everyones needs.we have been doing this for 6 years for contractors only we are now branching out trying to grow ourselves!
"The project went very well. Storm damage caused by two trees coming down on two sides of the fence was repaired in 2-3 hours. The workers reviewed all needed work from the estimate prior to beginning the work. They even volunteered to replace a top rail from another section of the fence, not included in the estimate, that had been bent in a storm many years before. The workers were very thorough, did not damage any plants or grass around the damaged areas and cleaned up after themselves. The workers were knowledgeable and polite. They made sure everything was nice and straight! Everything looked very nice when they were finished. The workers were approximately an hour late from the start time I had been given. I called and was told they had gotten a late start. Their good work made up for the lateness. "
The best thing to cut metal pipe is a durable pipe cutter that is made for metal. You may want to measure the diameter of the pipes before purchasing a pipe cutter to ensure it will be able to cut your metal pipes. Opt for a heavy-duty option to cut through metal like steel or cast iron.
This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.
The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.
Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.
The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it.
Some of the most common metals used by welders include:
Magnesium alloy: $7–$16 per pound
Low-carbon steel: $11–$12 per pound
Stainless steel: $13–$15 per pound
Copper/brass: $24–$29 per pound
Cast iron: $38–$79 per pound
Titanium: $60–$85 per pound
Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.
The Apple Valley, MN homeowners’ guide to welding services
From average costs to expert advice, get all the answers you need to get your job done.
The cost to install a 240-volt outlet in Minneapolis, MN varies depending on the amperage and the home’s current wiring conditions. Use this guide to budget for your next project.
When you need help with a metal project and don’t have the expertise or the time, call an expert welder for your project. Here’s how to vet and hire a welder.
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
