Best garage pros near Andover, MN

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

If push comes to shove, and you need to manually open your garage door, then you should be able to do so. To manually open your garage door, first, make sure that the door is in the down position. You’ll need to unlock your garage door opener’s emergency release mechanism, which is typically a red robe that you can find on the carriage. Once you’ve pulled the cord, you can manually lower the door.

If your garage door is stuck in an open position, consider contacting a professional to safely release the opener.

If your cement garage floor is sinking and cracking, your first step should be to call a local structural engineer to assess the problem. They can determine if it’s a minor amount of sinking related to normal settlement or if the issue is structural in nature. If you do have structural damage, the engineer or a foundation repair company that you hire will come up with a plan to fix the issue, which often consists of mudjacking for less severe issues or underpinning for more extensive problems.

Hearing or feeling vibrations in your house can be unsettling, but there are a few possible causes for a vibrating noise in your wall or floor. Light bulbs and fixtures, circuit breakers, loose pipes, or faulty wiring could all cause vibrations. If you’re not sure what’s causing the vibrations, you can call a contractor to assess your home and narrow down the cause.