Get matched with top welders in Orion, MI

Q: How long does it take to cut up a hot tub?

• <div><p>Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.</p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Orion, MI?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Orion, MI

*The Angi rating for Welding companies in Orion, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Orion, MI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on May 29, 2025

Reviewed in May 2025
Did a outstanding job on fixing my fireplace gas logs. was very knowable on how to repair ignition system.
Gas Tech Services
Request a quote
Reviewed in April 2025
I had Rewold remodeling services make some small repairs to my deck and had them stain it they did a wonderful job and they were very professional using all the right tools for the job Mr.rewold himself was very knowledgeable about the project and very transparent with what need to be done I...
Rewold Renovation, LLC
Request a quote
Reviewed in March 2025
I reached out on Angi to find someone to weld the arm of our electric gate opener and found D&D Welding. They were fast to reach out for the details of my job. They were able to give a great price and completed the job within days of posting my job needs. I would use D&D Welding again and/or...
D&D Welding
Request a quote
Reviewed in February 2025
Great work, good price ,nice person that did it!Will call WM Plumbing every time!
WM Plumbing, LLC
Request a quote
Reviewed in May 2024
Originally called for a quick leak , ending up needing to repair a very bad corroded straight pipe to the bathtub. Very knowledgeable and professional job, went out of his way to ensure everything worked out properly. Highly recommend!
AG Holdings & Investment Corp
Request a quote
Reviewed in March 2024
mike, thank you, thank you, we couldn't be happier..with both jobs, added generator outlet to fuse box and dug 100ft trench to replace electrical for irrigation system from house to pump (when completed could hardly see were trench was dug in yard and it was in July). Mike, your absolutely...
Ag Electrical Services
Request a quote
Reviewed in October 2022
Gunn Welding is my go-to for all my welding needs. Gunner is very knowledgeable and knows exactly what todo for each of my projects. He even came out to my job site to weld my plow in the middle of a snow storm so I could finish out the night.
Gunn Welding and Fabrication
Request a quote
Reviewed in December 2021
Guys welded some aluminum repairs on my boat and dock!
Nomad Welding LLC
Request a quote
Reviewed in September 2021
Mr. Bid did not do this work himself. He subcontracted another company to do the work. I liked the guy that came to do the work but he didn't seem to have any sense of how to do this work without making a mess. They didn't tape off the vents, which were wide open without covers at the time of...
Mr. Bid Services & Material Outlet
Request a quote
Reviewed in June 2021
Hirely recommend. Jimmy and his team did great job with our exterior painting.
Nilaj Construction, LLC
Request a quote

Find Welders in Orion

Welding inspection services

New to Angi

Serving Orion, MI and surrounding areas

Approved

We offer welding and consulting services suitable for many industries. Fabrication, welding, repair, welding Inspection (CWI)

Request Quote

Wellman Welding LLC.

New to Angi

Serving Orion, MI and surrounding areas

Approved

In business since 2024

Free estimates

Emergency services offered

Wellman Welding LLC. is a mobile welding, fabrication, and repair service dedicated to delivering dependable, high quality workmanship wherever it's needed. We bring our equipment directly to your home, business, farm, or job site to provide efficient on-site solutions from custom fabrication to structural and equipment repairs. Our commitment to integrity, reliability, and attention to detail ensures every project is completed safely, accurately, and to the highest standard. We take pride in our trade and put our customers' needs first on every jobsite.

1 neighbors recently requested a quote

Request Quote

PAAS Welding Trades

New to Angi

Serving Orion, MI and surrounding areas

Approved

Certified welder for 12 years. Multiple process and material available. Carbon steel, stainless steel, and aluminum.

2 neighbors recently requested a quote

Request Quote

Payne & McQueen Welding Co

New to Angi

Serving Orion, MI and surrounding areas

Approved

Payne & McQueen Welding Co. delivers professional welding services across Metro Detroit, specializing in mobile repair, industrial maintenance, and custom fabrication. Our primary facility, Welding Concepts Training, allows us to take on large projects with precision equipment and a full fabrication setup. We pride ourselves on skilled work, fast turnaround, and reliable service.

Request Quote

Iron Welder Bill

New to Angi

Serving Orion, MI and surrounding areas

Approved

In business since 2010

Free estimates

We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. We specialize in all your outdoor needs from concrete, patios, outdoor lighting, power washing, and spring and fall clean ups. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Response time2 days

Request Quote

Blackstar Welding, LLC

5.0(

)

Serving Orion, MI and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Everything was great, Steve explained every process he was doing in order and the welds were clean and precise. I definitely got my money worth going with Blackstar."

+34

Response time2 days

Response rate100%

Recommended by100%of homeowners

Serving Orion, MI and surrounding areas

In business since 2021

Emergency services offered

Small jobs welcome

"Guys welded some aluminum repairs on my boat and dock!"

Recommended by100%of homeowners

Serving Orion, MI and surrounding areas

In business since 2024

Credit card accepted

Offers commercial services

We pride ourselves on being the best Welding company in the area.\n\nWe've built an excellent reputation for customer satisfaction by providing quick estimates, a great attention to detail, and competitive pricing.\n\nBeing a screened and approved professional gives you the peace of mind you need to allow us to give your home the attention it deserves. Call us today and let's get started!

Response time9 hrs

Request Quote

EMP Welding And Fabrication, LLC

5.0(

)

Serving Orion, MI and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"I needed some steel pipe fencing repaired quickly and Eric showed up the next day. Beautiful welds and they are still holding strong! He was great to work with and I will call him if I need more steel work in the future!"

+10

Recommended by100%of homeowners

Request Quote

BURLEW FABRICATION LLC

5.0(

)

Serving Orion, MI and surrounding areas

In business since 2025

Free estimates

Emergency services offered

"Asked Tony at Burlew fabrication of he could make me steel ladder racks for the side of my garage for pipe and ladders. Within 24 hours he had them welded up and installed them himself. Great work, very happy with them, would hire again!"

Response time7 hrs

Recommended by16%of homeowners

Request Quote

Showing 1-10 of 45

Welding questions, answered by experts

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The Orion, MI homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Paige Bennett
•
May 2, 2026May 2, 2026
7 Types of Farm Fencing and How to Choose the Best One
There are a lot of different types of farm fencing. Find the one that’s right for your property with our handy guide.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Metal Awning Pro
Find the best metal awning professional for your project. Learn what qualifications to check, questions to ask, and how to hire a reputable pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.