Get matched with top stone countertop pros in Marcellus, MI

Quartzite is more expensive than granite, largely because of its rarity. Granite is naturally more common. A granite slab generally costs $40 to $60 per square foot (excluding super-rare types), while quartzite slabs cost anywhere from $50 to $150 per square foot. 

With both materials, it’s usually more affordable to purchase stones that are readily available in your location. You may need to import other stones, which come at a higher cost.

Yes, onyx is more expensive than granite. Its higher cost is due to its rarity, delicate nature, and the specialized care it requires. While granite countertops typically cost between $2,000 and $4,000, onyx is considered a premium material. Its luxurious, translucent appearance and unique ability to be backlit also contribute to the higher price. In terms of durability, granite is a hard, durable surface, whereas onyx is more delicate and can be damaged if not handled carefully.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.