Best countertop and backsplash pros near Gobles, MI

Resurfacing countertops is relatively easy—especially for a pro. During this process, a countertop contractor will sand down or remove the existing countertop surface, make repairs, and then add a new surface or special coating. In certain instances, like if you use a laminate countertop coating system, it’s an attainable DIY for beginners.

Concrete countertops should be sealed every one to three years, depending on the type of sealer used and the level of use your countertops get. For instance, hardworking kitchens will need yearly sealing. Sealing is important because it protects the surface from stains, moisture, and daily wear. Monitoring the countertop for signs of wear can help determine the ideal sealing schedule for your countertop.

Quartzite is more expensive than granite, largely because of its rarity. Granite is naturally more common. A granite slab generally costs $40 to $60 per square foot (excluding super-rare types), while quartzite slabs cost anywhere from $50 to $150 per square foot. 

With both materials, it’s usually more affordable to purchase stones that are readily available in your location. You may need to import other stones, which come at a higher cost.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.