Get matched with top stone countertop pros in Georgetown, MI

The cost to install a kitchen island ranges from $900 to $6,500, with an average price of around $4,800. The final cost depends on whether you buy a prefabricated unit or have one custom-built. Prefabricated kitchen islands are generally cheaper. A simple prefabricated cart can cost between $150 and $900, while a permanent, stationary prefabricated island costs from $900 to $5,000. A custom-built kitchen island averages around $4,800 but can cost $10,000 or more depending on factors like materials, size, design complexity, and accessibility.

Corian® is a popular countertop alternative to quartz. Created from an acrylic resin and natural minerals, Corian® resembles quartz and offers some similar benefits, but it comes at a cheaper price. Corian® countertops cost an average of $26 to $65 per square foot, which is less than half of what quartz countertops usually cost. The downside is that Corian® isn’t as durable as quartz, particularly regarding its resistance to scratches and high temperatures.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.