NorthWest Mechanical, Inc. is a full service mechanical contractor specializing in all aspects of residential mechanical work. We look forward to earning your business!
"He was able to quickly diagnose that the water leak from the water heater was a result of a ruptured tank, resulting in the need to replace the entire water heater."
"Service guy came as scheduled. Sent his "service" requirements to home base Home base calls back and lists, a very long list of what needs to be done and a very long list of what is not covered and what each item costs. The overall cost was outrageous and they weren't willing to give it to me in writing. Everything I had to pay for was overpriced, of course! They told me my other option would be to purchase my own water heater and they would reimburse me for what there water heater would cost, but no reimbursement for Labor, building permit, or any upgrades required by the local building department. The requirements of the building department were minimal. I went to Home Depot and had them do the installation and saved many hundreds of dollars. Lesson learned, have AHS do simpler repairs that don't require municipal building department approval. Have AHS pay for the equipment, and purchase installation from a trusted local installer."
"I had 2 inches of water in my basement. I called All Around Plumbing and they were there the next day.They solved my problem...and even a couple more drain issues. Very good people to work with and VERY reasonable prices. All plumbers I've ever used seem to want to make a month's salary on every job...but not All Around. I'd recommend All Around in a heartbeat...I'll always use them."
With several years experience, JTE Plumbing and Heating, LLC, works hard to bring each customer the best possible service and quality available. We look forward to working with you soon on any of your plumbing and/or heating and cooling needs. We welcome your questions and thank you for your interest.
10+ years of experience! \nOur mission is to be a provider that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business, we feel invested in our clients and constantly strive for customer satisfaction. Call or message us to schedule an estimate today!
Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.
It is very difficult and dangerous to install your own water heater, so we strongly recommend against tackling this as a DIY project. Not only will you need to wire your water heater, but you’ll also need to connect plumbing to the intake and outlet. Sweating copper pipes and connecting wiring properly are skills most DIYers don’t have, and even if you do feel confident you can do it, working with water and electricity always leaves the potential for electrocution. Hiring a local water heater installer is well worth the investment.
Electric water heaters do not need an attached vent, but the location of the water heater should allow for roughly 12 inches of clearance around it. This allows cool air to flow around the appliance and allows repair technicians to work on its components safely. The exact amount of clearance space required depends on your local building codes.
A water heater is one of the heaviest hitters in your home, and it needs as much power as possible to help it run efficiently and effectively.
Your water heater should be on its own dedicated circuit breaker, with no other power sources running to it. This is required to meet the National Electric Code–and to ensure it runs as efficiently as possible.
The time it takes to install or replace a water heater depends on the type of heater and the complexity of the job. A professional can typically replace a standard tank-style water heater in one to three hours. However, if the work area is tight, such as a small closet or crawl space, the job could take four to five hours. Replacing an existing tankless unit takes about two to three hours, while upgrading from a tank-style to a tankless water heater is more complex and can take four to six hours. The project will take longer if you are switching fuel sources, such as installing a gas heater which can add about an hour to the timeline, or if the unit needs to be relocated.
The Charlevoix, MI homeowners’ guide to water heater services
From average costs to expert advice, get all the answers you need to get your job done.
Looking to replace or upgrade your water heater? Use this water heater replacement cost guide to see what the work will cost and what factors affect your total.
A water heater flush costs $160 on average but can vary based on the unit size, type, labor, location, and more. Keep reading to learn how much you could pay.
Who can install a water heater for you? Look to hire a water heater installation pro or a licensed plumber for this job because of the challenges involved.
The average lifespan of water heaters is 6 to 15 years for conventional models and up to 20 for tankless ones, but it can be less if they are not properly maintained.