Top-rated floor polishers.

Get matched with top floor polishers in Alger, MI

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Alger, MI?

Select your specific project to find the pro for you.

Find Floor polishers in Alger

Mid Michigan Floor Care
4.0(
1
)
Clean & Polish Flooring - For Business

Serving Alger, MI and surrounding areas

In business since 2019

Free estimates

Offers commercial services

Here at Mid Michigan Floor Care, we have 10+ years of flooring experience on our staff. We pride ourselves on our diligence and our attention to detail. There is no job too big or too small we can't handle in a timely manner. Please don't hesitate to call today, we look forward to earning your business.

Response time10 mins
Floor Polishers questions, answered by experts

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

If your floor is still sticky after mopping, chances are you used too much or too little of the cleaning solution. Using too little won’t get all of the grime off, but using too much can leave its own residue. Refer to the cleaning solution’s instructions and dilute it as directed.

Before installing shoe molding, evaluate redoing or refinishing any floors and painting your walls or baseboard before putting on your shoe molding. If you don’t already have baseboard trim, you should install that before adding shoe molding. Shoe molding is the final touch. Additionally, a carpenter or other professional that’s installing shoe molding might also give you a deal on installing crown molding and replacing other trim if you get them done at the same time.

Professionals use HEPA vacuums, industrial-strength cleaners, and microfiber cloths for effective cleaning without damaging surfaces.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

The Alger, MI homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.