How do you prepare a shower before caulking?

• <div><p>Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to <a href="https://www.angi.com/articles/how-clean-mold-mistakes-avoid.htm">get rid of the mold</a>, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.</p></div>

Can I resurface my Corian countertop?

• <div><p>If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. </p><p>Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.</p></div>

Get matched with top bathtub restoration pros in West Enfield, ME

Q: How do you prepare a shower before caulking?

• <div><p>Before you begin caulking a shower, you&rsquo;ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to <a href="https://www.angi.com/articles/how-clean-mold-mistakes-avoid.htm">get rid of the mold</a>, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter&rsquo;s tape&mdash;one above the joint where you&rsquo;re caulking and another below it.</p></div>

Q: How is the resurfacing or refacing process conducted for kitchen or bath surfaces?

• <div><p>The process involves cleaning the surface, applying bonding agents or new veneers, and finishing with a protective top coat or polish.</p></div>

Q: How long does it take to refinish a bathtub?

• <div><p>For a standard-sized bathtub with minor damage, it takes approximately 3 to 5 hours to refinish. It might take a bit longer if your bathtub refinishing contractor needs to fill in significant cracks or gouges. This is the same if you have a specialty tub, like an oversized bathtub&mdash;you can expect your pro to take a bit on the longer side. </p></div>

Q: Can I resurface my Corian countertop?

• <div><p>If your Corian&reg; countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. </p><p>Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite&trade; 7447 or 7448) or lamb&rsquo;s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.</p></div>

Q: Can you put a tub liner over a cracked tub?

• <div><p>We don&rsquo;t recommend using a tub liner to cover up cracks in a bathtub. Instead, you should repair the cracks yourself if you have the experience or hire a pro. Cracks may seem like small surface imperfections, but they can lead to much larger issues, so repair them as soon as you can. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your bathtub restoration project in West Enfield, ME?

Select your specific project to find the pro for you.

Find Bathtub restoration pros in West Enfield

Service provided in New Hampshire, Vermont, Maine, Massachusetts. FREE in home estimates. 16+ Years Experience. Clean, professional, prompt service. Referances upon request. Fully insured.

American Tubs....

17940 Ajax Cir

2.33(

)

American Tubs....

17940 Ajax Cir

2.33(

)

Customers say: Terrific value

13 years of experience

American Tubs designs and manufactures a complete line of premium quality Walk-In Bathtubs that are ideal for people with Limited Mobility, Seniors, Disabled and people with pain, arthritis, stress and other debilitating conditions.

Bathtub Restoration questions, answered by experts

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.

The process involves cleaning the surface, applying bonding agents or new veneers, and finishing with a protective top coat or polish.

For a standard-sized bathtub with minor damage, it takes approximately 3 to 5 hours to refinish. It might take a bit longer if your bathtub refinishing contractor needs to fill in significant cracks or gouges. This is the same if you have a specialty tub, like an oversized bathtub—you can expect your pro to take a bit on the longer side.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries.

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

We don’t recommend using a tub liner to cover up cracks in a bathtub. Instead, you should repair the cracks yourself if you have the experience or hire a pro. Cracks may seem like small surface imperfections, but they can lead to much larger issues, so repair them as soon as you can.

The West Enfield, ME homeowners’ guide to bathtub restorations

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Becca Lewis
•
Feb 5, 2025Feb 5, 2025
How Much Does Bathtub Refinishing Cost? [2025 Data]
Bathtub refinishing costs are relatively inexpensive and can make your bathroom look like new. Our guide gives you the information to learn more about this process.
Scott Dylan Westerlund
•
May 29, 2025May 29, 2025
How Much Does Porcelain Sink Refinishing Cost? [2025 Data]
Find out how much it costs to refinish your porcelain sink and the factors that influence the final price to make it look like new, including size, type, and labor.
Stephanie Mickelson
•
Dec 17, 2024Dec 17, 2024
Is Bathtub Refinishing Worth It? Yes, Depending on Your Tub
Is bathtub refinishing worth it? Yes, it can breathe fresh life into your bathroom by making your tub look brand new. It can also save you hundreds of dollars.
Mitchell Grant
•
Feb 27, 2025Feb 27, 2025
5 Questions to Ask About Installing a Glass Shower Door or Enclosure
If you’re installing or replacing your shower doors, you’ll be working with a glass installation pro. Here are the most common shower door questions for this project.
Deane Biermeier
•
Feb 27, 2025Feb 27, 2025
5 Questions to Ask About Bathtub or Other Bath or Kitchen Surface Refinishing
If you're looking for an economical way to spruce up your bath or kitchen, here are the bathtub refinishing questions you should be asking a contractor.
Mariel Loveland
•
Aug 20, 2025Aug 20, 2025
Pros and Cons of Acrylic Tubs: Everything You Need to Know
Acrylic bathtubs are a common go-to, but are they right for your bathroom remodel? This guide breaks down the pros and cons of acrylic tubs.