Best drain pipe installers near Richmond, ME

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

While you don’t have to run out and immediately buy a new toilet at the first sign of a clog, if the toilet keeps clogging because it’s a low-flow or poorly designed model, a new toilet may be the way to go. If your toilet keeps clogging, you can try using less toilet paper, adjusting the fill valve, checking the toilet vent pipe on the roof, and using a toilet auger to make sure nothing is stuck in the pipe or trap.

Regardless of the drain cleaner type you choose to use, they all work through chemical reactions that create heat. Thanks to the heat, the clogged hair begins to dissolve until it is able to be flushed away. To avoid clogs in your drain due to hair, use hair catchers and empty them out after every shower.

It’s sometimes difficult to distinguish a clog from a frozen drainpipe since ice technically causes a clog. If the temperature doesn’t tip you off, there are a few additional signs that your pipe is frozen. Look for condensation and frost around the pipes. Ice in pipes can cause a banging or clanking noise as opposed to a clog from a softer material.