Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Madison, ME

Q: How do you make stainless steel shine?

• <div><p>To restore an appliance&rsquo;s shine, clean the surfaces using a natural cleaning solution, and then use a mineral oil or olive oil and a soft microfiber rag to polish stainless steel surfaces in the direction of the graining. A little goes a long way, so dip the cloth in a small amount of oil. If you have any excess, continue with a dry part of the microfiber cloth to soak up any remnants.</p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Q: How can you extend the life of brass?

• <div><p>Storing brass properly, cleaning it regularly, avoiding excess handling, and making sure to only use gentle, non-abrasive cleaning materials can all help extend the life of brass. Storing little-used brass items in airtight, water-tight containers will help prevent oxidation and water damage. For more frequently used items, try not to handle them frequently with bare hands, clean them when they begin showing signs of oxidation or tarnish, and avoid harsh, abrasive cleaners or tools.</p></div>

Q: What is corrugated metal?

• <div><p>Corrugated metal has been pressed so that it has alternating ridges or grooves. Metal that has undergone this process becomes incredibly strong, with some of the highest strength-to-weight ratios of any material. It's lightweight and has an increased surface area when compared to a flat sheet of metal. Both of these attributes contribute to its coveted strength. It's used for fencing because it's weather- and impact-resistant, rarely needs maintenance, and lasts many years&mdash;for a relatively low cost. </p></div>

Q: What is the best tool to cut metal ducts?

• <div><p>The best tool for cutting metal ducts depends on the duct's shape and thickness. For round ducts, a duct cutter provides accurate, clean cuts. Reciprocating saws equipped with metal-cutting blades are versatile and suitable for both round and rectangular ducts. They offer speed and precision, especially for thicker metal. </p><p>Tin snips are handy for intricate cuts or smaller ducts. However, an angle grinder with a metal-cutting wheel is powerful and efficient for large or thick metal ducts. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Madison, ME?

Select your specific project to find the pro for you.

Verified Reviews for Metal Fabrication And Restoration pros in Madison, ME

*The Angi rating for Metal Fabrication And Restoration companies in Madison, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

*The HomeAdvisor rating for Metal Fabrication And Restoration companies in Madison, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Metal Fabrication And Restoration needs.

Last update on November 17, 2025

Reviewed in September 2023
Mike always answered phone and came out within a very short time, answered all questions, was very patient and explained a lot. He and his crew were courteous, they cleaned up the work site, and finished in a timely fashion. They also replaced a window, a glass door and redid the upper front of...
Maine Pro Roofing
Request a quote
Reviewed in July 2022
Wendell and his crew are very professional and provided great workmanship to restore our aging basement that needed a new floor and parging of all walls. They are very neat, hardworking and delivered a product above and beyond our expectations. We highly recommend Wendell and Key...
Key Waterproofing Construction
Request a quote
Reviewed in March 2020
He rigged so it would work but couldn’t do the rest as it was electrical.
Fredericksburg Gas Fireplace Doctor
Request a quote
Reviewed in June 2019
I would highly recommend them to any family looking to replace their roof with a metal one. They are fast, efficient and a lot of fun to work with. They even shoveled off my roof!
American Home Improvement Group, LLC
Request a quote
Reviewed in July 2017
Mike, Ryan and the rest of the crew were fantastic in every way possible. They are efficient, friendly, dedicated professionals who transformed our worn log cabin into a vibrant, beautiful home. Mike's color recommendations were perfect for us! I would hire them again in a heartbeat. They...
Clean Cut Painting Company NY
Request a quote
Reviewed in April 2013
The quality of work is excellent. He listens well and is a great communicator. He is great at restoration and keeping the integrity or style of the home the same. The prices are very fair and reasonable. I would highly recommend them.
Nate York Construction Inc
Request a quote
Reviewed in December 2010
Were over a month late to begin project - we could accept that. At the end of the second day they completed the roof except for a vertical section approximately 3 feet long and six inches high where the satellite dish was screwed in. Worker said he damaged that piece and would be back next day...
Fowler's Roofing & Construction
Request a quote
Reviewed in September 2009
I have been using them for twenty years. The young man who comes in to do the work makes sure that all the pieces of furniture are padded properly under the legs so the clips of metal don't rust the carpets. He does a good job. If the carpets get dirty, we call them back and they come promptly...
COIT Cleaning and Restoration of Cleveland
Request a quote

Find Metal fabricators and restorers in Madison

Blakely Fence and Forge LLC

4.33(

)

•Approved Pro

Blakely Fence and Forge LLC

378 local quotes requested

3 years of experience

At Blakely Fence and Forge we pride ourselves on delivering high quality work, done timely at reasonable rates. My family has served this state for generations and now its our turn to offer superior workmanship to our neighbors. Whatever your need in fencing and metal work, we have you covered, no job too big, too small, or too complex, we wont stop until you are 100 percent satisfied.

"Top notch! It was a complicated day. Many workers in a small area. Blake focused on getting a lovely wooden fence completed with many feet and trucks shuffling around a small area. He remained congenial and flexible with the whole crowd working. And the fence was complete with all the hardware I requested. I highly recommend him."

Jessica B on September 2025

"Top notch! It was a complicated day. Many workers in a small area. Blake focused on getting a lovely wooden fence completed with many feet and trucks shuffling around a small area. He remained congenial and flexible with the whole crowd working. And the fence was complete with all the hardware I requested. I highly recommend him."

Jessica B on September 2025

Get matched with top metal fabricators and restorers in Madison, ME

Enter your ZIP and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Madison, ME?

Handyman for Multiple Small Project Service

Metal Stairs and Railings Installation and Replacement

Carpentry Framing Repair

Verified Reviews for Metal Fabrication And Restoration pros in Madison, ME

Find Metal fabricators and restorers in Madison

Blakely Fence and Forge LLC

Blakely Fence and Forge LLC

Gibraltar metals

Gibraltar metals

River View Construction Co.

River View Construction Co.

Freedomfab L.L.C

Freedomfab L.L.C

NB welding & piping

NB welding & piping

Skinnys welding and fabrication

Skinnys welding and fabrication

city metal fabricators

city metal fabricators

Asap Renewal

Asap Renewal

RNS Fabrications and welding LLC

RNS Fabrications and welding LLC

Northern Ascension

Northern Ascension

The Madison, ME homeowners’ guide to metal fabrication and restoration services

How Much Does Sheet Metal Fabrication Cost? [2025 Data]

How Much Does a Wrought Iron Railing Cost? [2025 Data]

6 Metal Stairs Questions to Answer Before Installation

Find Metal fabrication and restoration Pros in other cities near youNot finding what you are looking for in Madison? Check surrounding areas for Metal fabricators and restorers.

Which Metal fabrication and restoration task are you tackling?Find Madison Metal fabrication and restoration services on Angi who specialize in any of these tasks

Find Pros for other jobs in MadisonIf your Metal fabrication and restoration services job is complete, use Angi to find quality Pros in Madison for any number of jobs.