Get matched with top bathtub restoration pros in Livermore, ME

As with any project, refinishing your bathtub presents pros and cons to consider, such as:

Pros

• The job is typically quick, and your tub is ready within 48 hours.

• Your bathtub looks new.

• You don’t need to tear out the old tub and replace it with a new one.

• You can customize it with the color of your choice.

• You can’t tell the bathtub has been refinished.

Cons

• Refinished bathtubs can be slippery.

• Not all refinishing products are created equal.

• You need to wait up to 48 hours before using the bathtub.

If your Corian® countertop begins to appear dull or dirty, or you notice scratches on the surface, you can return it to its original finish while maintaining its look. To do this, repair any scratches with a repair compound and sand the surface after it dries. 

Then, use an orbital sander with either a 100-, 30-, or 15-micron disc and finish with a hand pad (like Scotch-Brite™ 7447 or 7448) or lamb’s wool bonnet and automotive cutting compound for a matte, semi-gloss, or gloss-finish, respectively.

Even at the lowest setting, there’s always a risk that pressure washing might damage your shower or tub. Never use this technique if there’s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.

Of the two most common and affordable bathtub materials, acrylic is notably better. Though fiberglass is cheaper, it is also more prone to scratching, chipping, fading, and cracking. Acrylic holds up better to wear and tear, cleaning, and sun exposure; the slight cost increase is usually worth the increased longevity.