Get matched with top patio pros in Littleton, ME

Deciding between concrete, stone, or brick pavers comes down to your budget and the ease of installation. Concrete is the least expensive material, followed by brick and then natural stone. Concrete pavers are also the easiest to install, but bricks are relatively easy as well. Stone pavers require more time and labor because their natural shapes make them harder to fit together. Professional stoneworkers, however, are able to shape them as needed.

You should place a layer of thick landscaping fabric directly over the concrete slab and then a thin layer of leveling sand over that to protect the pavers from moisture. For border pavers, you should plan on locking them in place with polyurethane adhesive. This will prevent them from shifting under foot traffic.

The average patio takes anywhere from 30 to 50 hours to build, including leveling the ground and paving the patio. If you’re doing the work yourself, you might want to plan on spending significantly more time, especially if you don’t have all the equipment or experience. After completing your patio build, consider hiring a pro to prepare the patio for spring.

About 6 inches between the edges of each stone in the sequence is common. Rather than sticking to 6 inches, some people measure the length of the entire path and adjust the space between stepping stones a couple of inches wider or narrower than 6 inches to make sure the entire path fits the length perfectly without having to cut a paver at either end. Other people prefer a design with a 24-inch distance from the center of one stone to the center of the next stone, which matches the stride of an average-sized person.