Best chimney inspectors near Riverside, MD

The roof overhang, also known as the eaves, does count as part of the roof’s square footage because it must be covered with the roofing material. The overhang is one of the reasons why you can’t base your roof's square footage on the square footage of the house. The roof square footage must also account for the pitch of the roof as well as the eaves.

It’s possible to walk on a clay tile roof, but you run the risk of breaking or cracking the tiles if you’re not careful, so it’s best not to walk on it if you can avoid it. If you or a contractor needs roof access, be sure to distribute your weight evenly and step on the portions of tile that are also supported underneath, which depends on your tile design. Walking on any roofing material is inherently dangerous, so wear rubber-soled shoes and use safety equipment if you need to access your roof.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

Roof leaks can go undetected for months or even years. A smaller leak that doesn’t cause visible signs in your home’s living area may allow water intrusion for a long time before you notice it. The longer a leak goes undetected, the worse the damage will be, so it’s important to frequently check for signs of a leak to keep a small problem from getting much bigger.