Get matched with top garbage removal pros in Plainville, MA

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

Your garbage disposal will only affect the health of your septic tank if you’re using it too frequently, or filling it with organic waste that doesn’t fully break down. If the tank fills up with too many solids, the bacteria won’t have enough time to consume it before more is added, which can lead to an overflow in the drain field. Your tank will need to be pumped more frequently with excessive or improper garbage disposal use.

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

Whether it's worth repairing your garbage disposal depends on its age and the specific problem. Generally, if the unit is eight years old or younger, repair is a good option. For minor issues like a bad seal or a simple jam, a repair can be inexpensive, sometimes under $10. However, if the motor is broken (a repair that can cost $150 or more) or the unit is getting old, it's often more cost-effective to replace the entire disposal.