Get matched with top drain cleaners in Brimfield, MA

Bleach—even diluted bleach—is not always the safest option for cleaning your drains. With a high pH, bleach can be highly corrosive to many types of pipes, especially when used regularly. When mixed with household cleaners and organic waste, it can also create dangerous chemicals. Remember to use proper protective equipment and ventilation when dealing with bleach.

Bleach is generally not recommended for your shower drains. Although diluted bleach can technically help clean your drain, it will not unclog your pipes. In fact, bleach can harm your plumbing system because it’s so powerful. The bleach can change the color of your sink and even corrode metal pipes and fittings.

Often, people reach for bleach because it's already in their house. But it's worth getting a plunger or a drain snake for the job instead. It'll be a lot less money to buy a new plunger than to pay a plumber to repair or replace damaged pipes.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

If your drain doesn’t have metal crosshairs or crossbars, you should use a tub drain extractor. These tools create a grip on the drain so you can turn it using a 1/2-inch ratchet drive, drain key, or wrench. Your drain may not have crosshairs if it's old and broken.